Taurus SPIRO Manual De Instrucciones página 19

(Fig.3.1).
- Take the device with one
hand and use your thumb
to press the leaves while
holding the plastic part
with your index finger until
the blades are removed.
(Fig.3.2).
- Use the cleaning brush (K) to
remove the hair from inside the
appliance and the blades.
- Clean the equipment with a
damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or prod-
ucts with an acid or base pH
such as bleach, or abrasive
products, for cleaning the
appliance.
- Never submerge the appliance
in water or any other liquid or
place it under running water.
- During the cleaning process,
take special care with the
blades, as they are very sharp.
- If the appliance is not in good
condition of cleanliness, its
surface may degrade and inex-
orably affect the duration of
the appliance's useful life and
could become unsafe to us.
- Clean the blades and the
comb guide with the cleaning
brush. Remove the hairs from
the blades and from inside the
appliance with the brush. It is
important to clean off remain-
ing hairs after each use.
- NEVER disassemble the
blades from the appliance for
clean it.
EMPTYING THE SUCTION
DEPOSIT:
- Unplug the battery charger
from the mains when it is not
in use, before carrying out any
cleaning, adjustment or acces-
sory change operation.
- To empty the suction deposit
(E). Press the tab on the left
side of the deposit. (Fig 4)
- Remove the hair with the
brush until it is clean.
- Close again
ANOMALIES AND
REPAIR:
- Take the appliance to an
authorized technical support
service if product is damaged
or other problems arise. Do
not attempt to disassemble or
repair the appliance yourself
as this may be dangerous.
FOR EU PRODUCT VERSIONS
AND/OR IN CASE THAT IT
IS REQUESTED IN YOUR
COUNTRY: