Chauvet DJ EZ RB Manual De Usuario página 12

Mounting
Orientation
Rigging
Mounting
Diagram
Page 12 of 48
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
The EZ Laser RGFX/RB must be mounted in a position that includes planning
for safe laser usage. In addition, make sure adequate ventilation is provided
around the product.
· Before deciding on a location for the product, always make sure there is
easy access to the product for maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the
product can support the product's weight (see the
· When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
· When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The double-bracketed yoke has 10-mm holes,
which are appropriate for this purpose.
· The bracket adjustment knobs allow for directional adjustment when aiming
the product to the desired angle. Only loosen or tighten the bracket knobs
manually. Using tools could damage the knobs.
Do not remove the bracket at any time. This product is intended to be
used with its bracket.
Mounting Clamp
Technical
Overhead Mounting
Surface Mounting
EZ Laser RGFX/RB User Manual Rev. 2
Specifications).
Safety Cable