Virax Mini VISIOVAL Manual Del Usuario página 22

EN
4) Use and maintenance of the power tool
a) Do not force the tool. Use a tool suitable for your intended purpose. An appropriate power
tool will result in better and safer results when used under the conditions for which it has been
designed.
b) Do not use a power tool if the ON/OFF switch does not work properly. A power tool which
cannot be controlled by way of its ON/OFF switch is dangerous and must be repaired.
c) Store unused power tools out of the reach of children and do expose them to people
who are not aware of the present safety instructions. Power tools are dangerous in the hands
of untrained users.
d) Maintain your power tools in good working order. Check for any misalignment or
blocking of moving parts, broken parts, and any other factors which may impair the
functioning of the tool. If it is damaged, have it repaired before use. Many accidents result from
poorly maintained tools.
e) Use the power tool and its accessories, as per the instructions and in the way in which it
is meant to be used, taking into account the working conditions and the work to be done.
Using a power tool for anything other than for what it is intended, can be hazardous.
f) Do not place the power tool in an object or a place which may contain an active electrical
charge.
5) Use and maintenance of the batteries
a) Recharge the battery only with the charger stated by the manufacturer. A charger
designed for a certain type of battery may cause a fire if used with another type of battery.
b) Only use specifically designated batteries in a power tool. Use of any other type of battery
may result in injuries or fire.
c) In abusive situations, the battery may release liquid; (avoid any contact). In case of
accidental contact, rinse thoroughly with water. If the liquid touches the eyes, call a physician
immediately. Battery liquid leaks may cause skin irritations or burns.
6) Servicing
Have your power tool serviced by an approved repair shop and using only original
replacement parts. This will ensure that your tool remains safe.
7) The battery is designed to be serviced by a trained technician (Virax After-sales service)
and should not be removed.
1.2 General safety precautions
A/C electric supply safety
Do not probe A/C electric supply with conducting objects. Short-circuiting the battery's poles may
cause sparks, burns and/or electric shock.
Do not use the A/C power supply if it is damaged. A damaged A/C power supply increases the
risk of electric shock.
Use an appropriate power supply. Do not try to use a transformer or generator. Failure to comply
with this instruction may result in damage to the A/C power supply or to the mini VISIOVAL and
may cause electric shock, fire or burns.
Always, prevent objects from covering the A/C power supply. Adequate ventilation is required in
order to achieve proper functioning of the A/C power supply. Allow for a space of at least 10 cm
(4") around the charger to ensure appropriate ventilation.
22