Tabla de contenido
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er
så vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres
på en genbrugsplads.
Garanti
Se venligst garantibetingelserne på garantikortet, som er vedlagt separat.
CE KONFORMITETSERKLÆRING (DK)
Vi erklærer herved, udelukkende på eget ansvar, at dette
opfylder følgende standarder eller standardiserede dokumenter:
EN60745-1, EN60745-2-2, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
i henhold til bestemmelserne i direktiverne:
98/37/EC, 73/23/EEC, 89/336/EEC, 2000/14/EC, 2002/95/EC, 2002/96/EC
Målt lydtrykniveau; Lwa = 91 dB(A)
Garanteret lydtrykniveau; Lwa = 104 dB(A)
2000/14/EC: Det garanterede lydtrykniveau er lavere end 105 dB(A). Procedure for
overholdelsesvurdering ifølge Anneks VI.
DK
Bemyndiget organ: TUV product service GmbH
Bemyndiget organs identifikationsnummer: 15007940.004
01-10-2006
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor
til enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
74
DHM-1100
Quality Manager Ferm Global
Lubrication
Fig.5
The machine will be damaged easily, when the grease level is not sufficient
enough!
Above this lubricate the tool every time the carbon brushes are replaced.
•
Check the oil level of the demolition hammer. When putting the machine in vertical posi-
tion (see fig. 2), the oil level should be till the red dot indicated on the oil level indicator.
•
To fill the oil reservoir, the oil level indicator can be removed with help of the wrench
supplied.
•
Fill the reservoir with the oil supplied (Multigrade oil SAE 15W40).
ON/OFF switch
Fig.4
•
Press the trigger switch (2) to start the machine.
•
Release the trigger switch to stop the machine.
Switch lock
Push the switch lock (1) after pressing the trigger switch (2) for continuous running.
To stop the tool from the locked position, press the trigger switch completely and then
release it.
Changing the carbon brush
Take care that the machine is not connected to the mains whenever mainte-
nance work is taking place.
•
Remove the cover of the carbon brush with help of a crosshead screwdriver
•
Remove the next cover with help of a flat screwdriver
•
Remove the carbon brush and replace it by a new one (on both sides)
5. MAINTENANCE
Take care that the machine is not connected to power whenever maintenance
work on the mechanical parts is taking place.
J. Lodewijk
Machines are designed to function problem-free for a long period with a minimum of main-
tenance. Through regular cleaning and correct treatment, you help assure a long working
life for your machine.
Defects
The machine should be regularly inspected for the following possible defects, and
repaired if necessary.
Ferm
Ferm
GB
07
Tabla de contenido
