Idiomas disponibles
Idiomas disponibles
BV 6575
HOW TO USE
Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measure cup, lid, seal ring 1, jar unit, seal ring 2, and blade assembly)
has already been assembled into the motor unit. Disassemble to wash all detachable parts except
the motor unit. Refer to the latter chapter CARE AND CLEANING.
3. Once all pieces have been cleaned and dry thoroughly, reassemble.
3.1 Invert the jar unit onto a level surface, holding the jar handle, put the the seal ring 2 and blade
assembly onto the jar base bottom and secure the blade assembly by turning it anti-clockwise until
tight（See Fig.3）
3.2 Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around the lid bottom
and put the lid onto the jar assembly. Place the measure cup exactly into the lid by fitting the small
projection on the both sides of the cup into the slots of the lid and turning the cup clockwise until
tight. (See Fig.4)
3.3 Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar
bottom. (See Fig.5)
CAUTION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto motor unit
Fig.3
How to use
1. Peeled or cored the fruit or vegetables and then cut it into small dices.
2.
Place the food to be blended into the jar（See Fig.6）. Usually, certain amount of purified water has to
be added to facilitate the smooth running of appliance. The proportion of the food and water is 2:3.The
amount of mixture should not exceed the max level as indicated on the jar.
Note: never use boiling liquids or run the appliance empty.
3. Put the lid on the jar. Be sure the measuring cup is in place.
4. Plug the power cord into a standard wall outlet.
Fig.4
Fig.5
12
