Cleaning And Maintenance - Unold 58615 Instrucciones De Uso

Ocultar thumbs Ver también para 58615:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
cover the heating element. Switch the appliance on. As soon as these cubes
are melted add more fat cubes until the required level between MIN and MAX
is reached. This type of fat will become solid after cooling down.
5.
As soon as the required temperature is reached the control lamp turns out.
The appliance is equipped with a thermostat to regulate the temperature.
The heating is turned on and off in intervals. Accordingly the control lamp
turns on and off. In order to obtain optimum frying results, you should only
add the foodstuff to be fried when the required temperature is reached and
control lamp turns out.
6.
Place the foodstuff into the basket and lower it slowly into the oil. If you want
your foodstuff crispy, you should fry without lid. As soon as the temperature
falls and green control lamp turns on, lift the foodstuff out of the fat and
wait until the required temperature is reached again. Then continue frying
until the foodstuff is ready.
ATTENTION:
Take care of oil splashes! The appliance is very hot during and after
operation!
7.
Frozen food contains more water than dry food and causes more splashes!
8.
Do not leave the fried food too long in the drainage position over the deep
fryer. Escaping steam may weaken the crust.
9.
Do not leave the appliance unattended after use, always unplug after use.

CLEANING AND MAINTENANCE

Turn the thermostat to 0 and unplug before cleaning.
Let the appliance cool off completely. Do not touch the heating
element, as this is still hot for a long time after use.
1.
Do not immerse the appliance into water or any other liquid or come into
contact with water.
2.
Remove the lid and take out the frying basket.
3.
Let the oil cool down. Take out the oil recipient with both hands. If you want
to use the oil again pass it through a very fine sieve. You may store the fat in
the enamelled oil recipient with closed lid in the refrigerator.
4.
Wipe the appliance with a damp cloth. Do not use any sharp or abrasive
cleaning agents for cleaning of the enamelled oil recipient, as this may
scratch the surface. Dry the appliance carefully.
30
Copyright UNOLD AG | www.unold.de
Tabla de contenido
loading

Tabla de contenido