General Functions; Automatic Standby - Grundig M 1000 BT Manual De Istrucciones

GENERAL FUNCTIONS

Switching on and off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug.
1 Switch on the hi-fi by pressing »
– The last input source used is automatically
selected.
2 Switch the hi-fi system to standby mode by
pressing » 8 «.
CLOCK mode
The hi-fi system switches to standby in the
mode after 15 minutes. This lowers the power con-
sumption to below 1 W.

Automatic Standby

The device switches to standby mode automati-
cally after 15 minutes if:
– the device is in the stop position;
– there is no audio signal detected at the
IN« socket;
»AUDIO
– the Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
Adjusting the volume
1 Turn the control knob on the hi-fi system or
press » – VOL +« on the remote control to
change the volume.
Selecting sound settings
You can choose between preset sound settings.
1
Select the sound setting using »EQ« on the
remote control.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with » « on the remote control.
2 Deactivate mute with » « on the remote con-
trol.
26
ENGLISH
---------------------------------------------------------------------------------------
Displaying the time
1
8 «.
CLOCK-
Display the time with »CLOCK« on the remote
control.