Montage; The Ideal Location - Unold 86755 Instrucciones De Uso

Ocultar thumbs Ver también para 86755:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48

MONTAGE

Parts list
No. 1
Holders
No. 2
Panels (2 pcs, mirrored side facing downward)
No. 3
Base cover (1 pc.)
No. 4
Base (1 pc.)
No. 5
Screws M 6 x 20
No. 6
Washers (2 pcs)
No. 7+8
Cable-Clip (incl. Screws M 4 x 35)
For set-up you require a Phillips head screwdriver and the hex socket srewdriver.
1.
Remove all packaging materials and any transport safeguards. Keep packag-
ing materials away from children.
2.
Check whether all listed accessory parts are present and intact.
3.
First turn the housing over so that the lower end is up.
4.
Insert the two panels (2) on the holders. Ensure that the side that is slightly
reflective points downward for optical reasons.
5.
Route the power cord through the base. Note that the plug for the electrical
outlet must poke out on the underside of the base. The end of the power
cord, on which the connection socket is mounted, must be threaded through
the housing. Fastening the power cord with the cable clip (7+8).
6.
Carefully place the base (4) in the base cover (3) and place both the base
and base cover onto the holders (1) together.
7.
Now place the washers (6) and firmly screw all parts onto the housing with
screws M 6 x 20.
8.
Turn the housing over again so that it is now right side up.

THE IDEAL LOCATION

1.
Maintain an adequate safety distance (at least 1,50 meter) to other objects,
such as walls, furniture, curtains, bushes, shrubbery, etc.
2.
Only place the appliance in operation in a vertical position.
3.
Ensure that air can flow in and out unhindered - the heating element of the
appliance must not be covered under any circumstances!
4.
Only place the appliance on a solid and level substrate. Do not place the
appliance on soft surfaces (sofa, bed) because the appliance can tip over.
5.
In addition, ensure that the appliance is not set up on deep-pile carpets or
in dusty environments.
6.
For safety reasons, the appliance must not be used in the vicinity of sinks,
bathtubs, ponds or water connections.
22
Copyright UNOLD AG | www.unold.de
Tabla de contenido
loading

Tabla de contenido