Handling The Machine - Berkel BS+2400 F Manual De Uso

3.3 Installation
ATTENTION!
The installation area must be level and firm. The supporting
surface must provide a completely safe base. Plenty of
space must be left around the machine - see Fig. 2.4.1.
This permit greater manoeuvrability in the work phases and
provides access for subsequent maintenance operation.
Suitable lighting must be provided around the machine to
ensure correct operator visibility.
Move the packing with a forklift truck or similar as the
machine is packed on a pallet and protected in a card-
board (Fig. 3.3.1).
-
Remove the two bands that fix cardboard to pallet.
-
Unscrew the saw form pallet.
-
Remove cellophane machine wrapping and all other pack-
ing inside.
-
Use a fork-lift or similar machine suitable for moving the
bone saw, as it weighs 100 kg.
Never move it manually.
3.3.1 Disposal of the packing
The packing components - cardboard, nylon, wood - can be considered solid urban
refuse and can therefore be disposed of normally. If the machine is delivered to
countries with special regulations, the packing must be disposed of in accordance
with the laws in force.
3.3.2

Handling the machine

Lift the machine with a forklift truck of suitable capacity. Check the stability and
positioning of the load on the forks, in particular on rough, slippery or sloping sur-
faces. When the machine is being moved, keep the load as low as possible in or-
der to ensure greater stability and visibility. Widen the forks to obtain maximum
stability.
3.4 Connection to the electrical system
- Connect a 16 Amp plug, provided by manufacturer, to the electrical supply cable.
Check that the electrical power supply line corresponds to the value on the ma-
chine identification plate. All work must be carried out by specialist personnel only,
specifically authorised by the person in charge. Connect up to a mains with effi-
cient earth socket.
19
Fig.3.3.1
Fig.3.2.2