Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Symbols used in this manual
WARNING!
Denotes impending danger. Non-observance of this warning
may result in death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation. Non-observance
of this warning may result in injury or damage to property.
NOTE!
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power tool, read the
operating manual!
Wear protective goggles!
Wear ear defenders!
Protection class II
Disposal information for the old machine (see
page 11)!
Important safety information
WARNING!
Read all safety instructions and general instructions.
Failure to comply with the safety instructions and general
instructions may result in electric shock, fire and/or serious
injuries. Keep all safety instructions and general
instructions in a safe place for future reference.
Before using the power tool, please read the following and
act accordingly:
– these operating instructions,
– the "General safety instructions" on the handling of power
tools in the enclosed booklet (leaflet no.: 315.915),
– the currently valid site rules and the regulations for the
prevention of accidents.
This power tool is state of the art and has been constructed
in accordance with the acknowledged safety regulations.
Nevertheless, when in use, the power tool may be a danger
to life and limb of the user or a third party, or the power tool
or other property may be damaged. The power tool may be
operated only if it is
– for its intended use,
– in perfect working order.
9
MXE 1000/MXE 1002/MXE 1200/MXE 1202/MXE 1602
Faults which compromise safety must be repaired
immediately.
Intended use
The mixer is designed
– for commercial use in industry and trade,
– with mixer paddle of appropriate size and shape,
– for mixing liquids of low viscosity such as paint, varnish,
adhesive, light plaster, resin,
– for mixing material of high viscosity such as plaster,
mortar, lime, screed, filler etc.,
– for mixing stiff and sticky material of high viscosity
such as adhesive, resin, sealing and insulating
compound etc.,
– for use with mixer paddles and accessories which are
indicated in these instructions or recommended by the
manufacturer.
The mixer is not to be used for mixing foodstuffs.
Safety instructions
WARNING!
Read all safety instructions and general instructions.
Failure to comply with the safety instructions and general
instructions may result in electric shock, fire and/or serious
injuries. Keep all safety instructions and general
instructions in a safe place for future reference.
Do not process explosive materials (e.g. highly
inflammable solvents). Power tools generate sparks
that could ignite the vapour given off.
Pull out the plug immediately and have the power
tool checked by customer service if it falls into the
stirred product. Should stirred product makes its way
into the electric appliance, damage could ensue and
cause an electric shock.
When working, hold the power tool firmly with both
hands and ensure that you have a secure footing.
The power tool is controlled more securely if held with
both hands.
Do not process any material containing asbestos.
Asbestos is carcinogenic.
Take protective measures if dust is likely to be
generated during work that is hazardous to health,
combustible or explosive. For example: some dusts
are carcinogenic. Wear a protective mask and use a
dust/particle extraction system if one can be fitted.
Wait until the power tool has come to a stop before
putting it down. The cutting accessory may snag,
causing the operator to lose control of the power tool.
Do not use the power tool if it has a damaged power
cord. Do not touch the damaged power cord and pull
out the mains plug if the power cord is damaged
during work. Damaged power cords increase the risk of
an electric shock.
If power tools are to be used outside, connect them to a
residual current breaker.
Tabla de contenido
