Gear Selection - Flex MXE 18.0-EC Instrucciones De Funcionamiento Originales

Gear selection

CAUTION!
Only select gear with motor stationary.
 Press lock (1.) and turn switch in anti-
clockwise direction to the required
stage (2.)
2nd speed and spindle lock:
I Output stage with higher torque
II Output stage with higher speed
Spindle lock for changing mixer
paddle
Regulating the speed
 To adjust the maximum working speed,
set the speed preselector switch to the
desired stage.
16
Speed
Stage
1
2
3
Switching the mixer on and off
The mixers are equipped with an
accelerator switch. It allows the speed to be
gradually increased up to working speed.
Switching on without locking
 Press and hold down the switch (1.).
 To switch off, release the switch (2.).
Switching on with locking
 Press and hold down the switch (1.).
 To lock into position, hold down the
locking button (2.) and release the switch.
 To switch off, briefly press and then
release the switch (3.).
NOTE!
If the mixer does not turn after switching on:
Switch the power tool off (release lock by
–
pressing switch).
Rotate the mixer paddle manually by 45°.
–
Switch the power tool back on again.
–
MXE 18.0-EC
I II
210 320
325 490
530 780