Maintenance And Repairs - Stihl SR 430 Manual De Instrucciones

Sound pressure level L
peq
DIN EN 15503
SR 430:
SR 450:
Sound power level L to
weq
DIN EN 15503
SR 430:
SR 450:
Vibration measurement a
hv,eq
DIN EN 15503
SR 430:
SR 450:
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
SR 430, SR 450
to Exhaust Emissions
The CO value measured in the EU type
2
approval procedure is specified at
97 dB(A)
www.stihl.com/co2.
102 dB(A)
The measured CO
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
108 dB(A)
of a specific engine.
109 dB(A)
The applicable exhaust emission
to
requirements are fulfilled by the
intended usage and maintenance
described in this instruction manual. The
type approval expires if the engine is
Handle,
modified in any way.
right
2
1.9 m/s
2
1.9 m/s
2

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
value was
repairs must be carried out by a
2
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
English
75