Dusting And Spreading Mode - Stihl SR 430 Manual De Instrucciones

Dusting and Spreading Mode

SR 450 only.
Metering lever
A
1
B
1
The discharge rate is infinitely variable
with the metering lever (1).
Position A (metering lever vertical) –
N
feed closed
Position B (metering level parallel to
N
blower tube) – feed open
Discharge rates
The discharge rate is dependent on the
density and grain size of the product
used.
Granulate 0 - 9 kg/min
Powder 0 - 3 kg/min
SR 430, SR 450
Conversion from mistblowing to dusting
and spreading mode
Empty and clean the solution
N
container – see "After Finishing
Work".
Close the valve lever (1) for solution
N
feed.
2
Close the metering lever (2) for
N
dusting and spreading mode.
Solution container
A
1
B
The selected operating mode is
indicated by the symbols on the
metering unit's housing.
Position A – Mistblowing mode
N
Position B – Dusting and spreading
N
mode
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
Pull the strainer (1) upward and out
N
of the solution container.
English
61