Problem Solving; Technical Specifications - Wetrok Duomatic Laser 65 Instrucciones De Manejo

Problem solving

FAULT
Machine does not work
Cleaning action inadequate
No suction or suction inadequate
Streak formation
No supply of cleaning agent or water, or supply
inadequate
Laser not functioning or poorly visible
Batteries not charged or charge is too low

Technical specifications

Duomatic Laser
Nominal voltage:
Theoretical power:
Operating width::
Width of suction nozzle, folded:
Fresh water tank:
Dirty water tank:
Brush motor
Suction turbine
Pump
Overall nominal rating:
Battery capacity
Onboard battery charger
Max. charge current (optional)
Duration of battery charge
Max. power rating for laser, class 2M
CAUSE
Emergency-stop plug not inserted
Fuse or overvoltage protection tripped
Machine switched off automatically
Power down function)
Brush/pad badly worn
Dosing too low
Suction nozzle or suction hose clogged
Suction hose not connected
Tank lid not closed or seal defective
Sealing lid at outlet hose not correctly screwed on or
seal faulty
Turbine switched off or at reduced level
Suction lips contaminated or worn
Suction nozzle pad incorrectly adjusted
Tubes clogged
Fresh water screen clogged
Water supply closed.
No fresh water in tank
Laser function is deactivated
Drive is in reverse
Laser lens is soiled
Laser is incorrectly adjusted
Unsuitable conditions of floor or lighting
Duration of battery charging too short
End of battery service life reached
65 / 75 65 L / 75 L
V 24 / 24 24 / 24
m2/h 3250 / 3750 3250 / 3750
mm 650 / 750 650 / 750
mm 800 / 900 800 / 900
l 80 / 80 80 / 80
l 80 / 80 80 / 80
W 2 x 400 2 x 400
W 550 550
W ---- 2 x 25
W 1585 1635
Ah 180 180
A 20 20
h ≤ 2,5 ≤ 4,5 (mit LRS)
mW 5 5
Deutsch
SOLUTION
Establish connections
Reset with key switch off/on
Français
Reset with key switch off/on
Replace brush/pad
Turn up dosing
Remove clogging
Italiano
Connect suction hose
Close tank lid correctly or replace seal
Check seal, screw on lid firmly, replace if necessary
Español Switch on turbine or increase to full suction power
Clean or replace suction lips
Correctly adjust height and angle of suction nozzle
(should be done by specialist)
Rinse fresh water tank and tube system with clean
water
English
Clean fresh water screen
Open or adjust water supply
Fill with fresh water
Activate laser function
Suomi
Laser is activated only when machine drives forwards
Clean carefully with cleaning cloth
Readjust laser attachment
(should be done by specialists)
---------------------
Nederlands
Observe the required charging duration
Change batteries (observe safety instructions)
Svenska
Duomatic Laser
Weight without battery, without water:
Dansk
Weight with battery 180 Ah:
Weight: battery+water:
Max. dimensions (LxWxH):
Max. dimensions of battery com-
partment (LxWxH):
Polski
Underclearance
Suction turbine
Brush pressure: max:
Brush pressure max:
Português
Brush rpm::
Noise level (Leq)
Max. permissible incline
Anti-splash protection:
Certification mark::
Türkçe
Drive speed
3
65 / 75 65 L / 75 L
kg 153 153
kg 277 277
kg 357 357
mm 1370 x 800 x 1170 / 1420 x 900 x 1170
mm 375 x 480 x 300
mm 100 100
mbar (m3/h) 166 (90) 166 (90)
N/cm2 0,24 0,24
kg 38 38
1/min. 210 210
dB (A) 70 (68 LRS)
% 8 8
IP.. X 3 X 3
CE
✔ ✔
(km/h) forw. 5 / rev. 2,3 forw. 5 / rev. 2,3
DE
FR
IT
ES
EN
FI
NL
SV
DA
PL
PT
TR
AR