Rengøring
Rengør regelmæssigt maskinkappen med en blød klud, helst efter hvert brug. Sørg for at
ventilationshullerne er fri for støv og snavs. Brug en blød klud, der er vædet i sæbevand til at
fjerne hårdnakket snavs.
Brug ingen opløsningsmidler, så som benzin, alkohol, ammoniak, osv. Den slags stoffer
beskadiger kunststofdelene.
Smøring
Maskinen behøver ingen ekstra smøring.
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan
bestilles.
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på
en genbrugsplads.
Garanti
Læs det separat vedlagte garantikort for garantibetingelserne.
DK
78
Too high a load at a low speed of the Combi tool can burn out the engine.
4. MOUNTING THE FLEXIBLE SHAFT AND STAND
Flexible shaft
Fig. 2
•
Screw the black ring off the chuck and remove it.
•
Mount the flexible shaft on the Combitool, placing the inner shaft (1) in the chuck. The
black ring of the flexible shaft (2) can then be fastened onto the Combitool.
Never operate the axle locking button if the engine is still rotating.
Stand for the Combitool
•
Mount the stand on the side of a workbench or worktop with a maximum thickness of
55 mm.
•
The height of the stand is adjustable. Loosen the top tube of the stand by turning it
anticlockwise. Draw the tube out to its maximum height and secure it by turning the tube
clockwise. The height of the suspension bracket is adjustable by loosening the black
knob. After adjusting the suspension bracket to the correct height, retighten the knob.
•
Attach the Combitool to the suspension bracket of the stand; this suspension bracket can
be turned 360°.
Accessories for the Combitool
Ferm does not deliver spare accessories for the Combitool. The Combitool is designed to use
the standard accessories of Dremel, Black & Decker, Bosch or Proxxon. Always check that the
maximum rpm of the accessory is suitable for the maximum speed of the Combitool.
Grinding stones
Fig.3
When using a grinding stone the first time, use the dressing stone to balance it. The dressing
stone can also be used for cleaning the surface or to give the grinding stone a special shape.
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Ferm
Ferm
GB
Speed setting
-
+
+-
-
07
Capítulos
