Aqua HC 201 Manual De Instrucciones página 11

2.6 Level / Flow
This function allows to stop the pump at the closing or opening of a volt free
switch conctact (low level switch). Moreover it can enable or disable the flow
sensor input.
Programming: push the button START/STOP to put the pump in pause and
enter the programming mode. With the arrows ◄ ► button scroll through the
menu untill appears [LEV/FLOW]. By pressing the arrow ▼ again go into the
menu LEVEL and with the arrows ◄► it is possible to choose the
interpretation of low level alarm (normally open, normally closed). Pressing
again the▼ arrow you enter the sub-menu FLOW to enable or disable the
signal coming from the flow sensor with the arrows ◄►. Then press the ▼
or ▲ arrow to escape and the START button to recommence dosing with the
new settings. (Fig. F)
2.7 Buzzer (only for Alarm function)
This function allows to emit a sound in case of Alarm.
Programming: with the arrows ◄► scroll the menu untill BUZZER displays.
With the arrow ▼ go into the menu BUZZER; through ◄► select the desired
function (active or inactive). Then press the ▲▼ to escape and then the
START/STOP button to recommence dosing with the new settings. (Fig. G).
2.8 Clock
It is used to set the time and date.
Programming: with the arrows ◄► scroll the menu untill CLOCK is displayed. With
the arrow ▼ go into the menu:

By pressing the ▼arrow again you can go into the under-menu DATE XX-xx, that
allows, through ◄► to change the hours.

By pressing the ▼ arrow again you can go in the under-menu DATE xx-XX, that
allows to change the minutes through the arrows ◄►.

By pressing the ▼arrow again you can go into the under-menu DATE xx-xx that
allows through ◄► to change the date by setting: day – month – year.
Then press the ▲▼ to escape and then the START/STOP button to recommence
dosing with the new settings. (Fig. H).
2.9 Timer
The pump has a timer control which permitts up to 8 timed doses per day on a
repetitive daily bases or alternatively on a 7-day cycle.
Programming: with the arrows ◄► scroll the menu untill TIMER is displayed. With the arrow ▼ you can go
into the menu TIMER. Through ◄►arrows it is possible to choose among TIMER OFF, DAILY SETS, WEEKLY
SETS.
Daily sets: through the arrow ▼ go into the corresponding menu: SET 1 On and through ◄► it is possible to
set the switching on hour of the pump, by pressing ▼ it is possible to set the minutes. With the ▼ you can
reach SET 1 OFF and repeating the procedure it is possible to set the switching off time. It is possible to
program a maximum of 8 daily interventions (ON/OFF) by repeating the operation above.
Weekly sets: through the arrow ▼ go into the menu WEEK TIMER [SUN SET 1 ON] and through ▼ it is
possible to set the switching on time of the pump. By pressing ▼ again you reach SET 1 OFF and through ◄►
you can set daily the extinction time of the pump. By pressing ▼again it is possible to run over all set points of
all days of the week untill the one in which making the dosage has been reached. It is possible to program a
maximum of 8 daily interventions for each day of the week by repeating the operation above. Then press the ▼
to escape and then the START/STOP button to recommence dosing with the new settings. The display will
visualize, lower to the left, T.OFF or T.ON to indicate that the pump works in accordance with the timer (Fig I).
ADSP7000191B HC201-HC301 V1
25/10/2011 Rev.1.2
LEV/FLUX
LEVEL LEVEL
NORMAL REVERSED
FLUX SENS. FLUX SENS.
ENABLE DISABLE
Fig. F
BUZZER
BUZZER BUZZER
ENABLE DISABLE
Fig. G
CLOCK
CLOCK SET
XX:xx DAY
CLOCK SET
XX:xx DAY
CLOCK SET
xx:xx DAY
CLOCK SET
xx month year
Fig. H
11 of 32