Installing The Wall Holder; Operation - Unold 87396 Manual De Instrucciones

Caution! The appliance is very hot during and after operation!
Never open the housing of the appliance. There is danger of
electric shock.
For safety reasons never use the appliance close to or in a bath-
tub or washbasin or any other container filled with water. If the
hair dryer is used in a bathroom, unplug it from the wall socket
after use, since nearby water presents a danger even when the
hair dryer is switched off.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

INSTALLING THE WALL HOLDER

1. Caution: If you want to install the
wall holder in damp rooms, such
as bathrooms, ensure that there
is an adequate distance to the
bathtub, sink and other vessels
filled with water. The distance in
this regard must be at least 1.5
meters to ensure safe operation.
2. First check whether an electrical
outlet is within reach at the desi-
red installation location.
3. Attach the wall holder with three
screws. If necessary use dowel

OPERATION

1. Ensure that the on/off switch is on
"0".
2. Plug the power plug of the wall
holder into an electrical outlet
(220–240 V~, 50/60 Hz).
3. Take the hair dryer out of the wall
holder.
4. Switch the appliance on via the
On/Off switch.
18
Copyright UNOLD AG | www.unold.de
plugs to securely attach the wall
holder. Please use the attached
drill template for easy installation.
Note: at the back of the wall hol-
4.
der there is a small tab. If you
mount it first with a screw on the
wall, you can simply mount the
wall holder and then secure it
with the other two screws on the
right and the left hole.
5. Select the desired speed level.
The following settings are availa-
ble:
0 = Off
1 = Moderate air flow, for drying
and styling hair
2 = Powerful air flow and heat
flow, for fast drying of hair