Dust Emissions In The Environment; Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits - Nilfisk CTS26 Manual De Instrucciones

CTS26 ClassII Div2 Group F, G
Original instructions

Dust emissions in the environment

Vacuum cleaners can emit different amounts of sucked dust in
the air, depending on the filter they are equipped with. Hereunder
there are some indicative values of the filter performances:
■ Primary filter can retain at least 99% or 99.9% of
particles depending on filter type installed.
■ Absolute filter can retain at least 99.995% of particles.
General recommendations WARNING!
If an emergency situation occurs:
■ filter breakage
■ fire outbreak
■ short-circuit
■ motor block
■ electric shock
Turn the vacuum cleaner off, unplug it and request
assistance from qualified personnel.
[ NOTE ]
Check the place of work and substances tolerated for the
vacuum cleaner in classified environment.
WARNING!
The vacuum cleaners must not be used or stored
outdoors.
These vacuum cleaners cannot be used in a corrosive
environment.
WARNING!
Version for liquids is equipped with the proper shut-
off device. If foam or liquid leaks out of the vacuum
cleaner, turn it off immediately, unplug it and contact
qualified personnel for assistance.
US
C429
4

Vacuum cleaner description

Vacuum Cleaner Parts and Labels

Figure 1
1. Identification plate which includes:
• Manufacturer's name and address
• Designation and model,
• Technical specifications
• Serial number
• Year of manufacture
• Weight (kg)
2. Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
3. Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is off.
Failing this, the shaking would have no effect while the
filter itself could be damaged.
4. Inlet
5. Outlet
6. Check valve (Clapet)
7. Vacuum unit
8. On/off switch
9. Vacuum hose
10. Band latch
11. Container release handle
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (9) and blows out through the outlet (6).
Before turning the vacuum cleaner on, fit the vacuum hose
into the inlet and then fit the required tool on to the end part.
Refer to the manufacturer's accessory catalog or Service
Center. After the hose and tools have been fitted, make sure
that the motor turns correctly.
This vacuum cleaner is supplied with a unidirectional
clapet valve which prevents the vacuum from blowing air
and materials out of the dust container if the wrong phase
sequence is found. If the case, the vacuum cleaner does not
suck any air.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container. The vacuum cleaner is equipped with a filter which
enables it to be used for the majority of applications.
Besides the main filter which retains the more common types
of dust, the vacuum cleaner can be fitted with an upstream
absolute (HEPA) filter with a higher filtering capacity for fine
dust and substances harmful to health.
02/2017 02/2017
CTS26 ClassII Div2 Group F, G
Original instructions

Optional kits

Following optional kits are available for vacuum cleaner
conversion:
▪ Cyclone filter protector (standard and for vapours)
▪
Lifting bracket
▪ Upstream absolute filter
▪ Downstream absolute filter
▪ Grill and depressor with bag (polyliner)
▪ Antistatic safe bag
▪
Mechanical float with or without grill and valve (on
request)
On request, the vacuum cleaner can be supplied with optional
kits already installed. However, they can also be installed at a
later date.
Please contact the manufacturer's sales network for further
details.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only supplied and authorized genuine spare parts.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalog.
WARNING!
Use only genuine accessories supplied and authorized
by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Figure 2
Model A (in) B (in) C (in)
CTS26
47.2 27.6 66.9

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
5
US
lbs
258
C429