Chicco I-feel Instrucciones De Uso página 17

• WARNING: Make sure the batteries are fit-
ted with their poles in the right direction.
• WARNING: Never mix new and old or diffe-
rent types of batteries.
• WARNING: Always keep batteries and tools
out of the reach of children.
• WARNING: Do not short-circuit the battery
terminals.
• WARNING: Always remove spent batteries
from the toy to avoid the danger of leakage
from the battery damaging the product.
• WARNING: Always remove the batteries if
the product will not be used for a long pe-
riod of time.
• WARNING: Remove the batteries from the
toy bar before disposing of the product.
• WARNING: Do not burn or dispose of old
batteries into the environment. Dispose of
them at an appropriate differentiated col-
lection point.
• WARNING: If the batteries happen to leak
liquid, replace them immediately, making
sure you clean the compartment before-
hand; wash your hands thoroughly if you
come into contact with any such liquid.
• WARNING: Always dispose of leaking bat-
teries immediately: they can cause burns or
other types of injuries.
• WARNING: Do not attempt to recharge non-
rechargeable batteries: they might explode.
• WARNING: The use of rechargeable batte-
ries is not recommended as the toy panel
may stop working properly.
• WARNING: If using rechargeable batteries,
remove them from the toy before rechar-
ging them.
• WARNING: Do not leave the product out in
the rain; water infiltrations will damage the
electronic circuit.
• WARNING: Using the MP3 device will have
an effect on how long the toy batteries last.
• WARNING: T he choice of music and volume are
controlled from the connected MP3 player.
• WARNING: Artsana S.p.A declines all re-
sponsibility for any faults or malfunctions
of the MP3 device.
• WARNING: Rechargeable batteries are only
to be charged under adult supervision.
CARE AND MAINTENANCE
FABRIC COMPOSITION
LINING: All new materials. Outer cover: 100% polyester, Padding:
100% polyester
BOOSTER CUSHION: All new materials. Outer cover: 100% polye-
ster, Padding: 100% polyester.
TOY: All new materials. Outer cover: 100% polyester, Padding:
100% polyester.
• WARNING: This product requires periodic maintenance.
• WARNING: The cleaning and maintenance operations must
only be carried out by an adult.
• WARNING: Periodically inspect the rocking cradle to check for
broken, torn or missing parts: if this is the case, do not use it.
• Please refer to the care label for instructions on how to wash the
fabric parts.
Hand wash in cold water
Do not bleach
Do not use a dryer
Do not iron
Do not dry clean
• Check that the fabric and stitching are in good condition each
time you wash it.
• Prolonged exposure to direct sunlight can cause the fabric to
fade.
MAINTENANCE
Only use water and a soft damp cloth to clean the toy bar and the
vibration block.
(GB) THIS PRODUCT COMPLIES WITH EU DIRECTI-
VE 2002/96/EC.
The crossed bin symbol on the appliance indicates that
the product, at the end of its life, must be disposed of
separately from domestic waste, either by taking it to a
separate waste disposal site for electric and electronic appliances
or by returning it to your dealer when you buy another similar ap-
pliance. The user is responsible for taking the appliance to a special
waste disposal site at the end of its life. If the disused appliance is
collected correctly as separate waste, it can be recycled, treated
and disposed of ecologically; this avoids a negative impact on both
the environment and health, and contributes towards the recycling
of the product's materials. For further information regarding the
waste disposal services available, contact your local waste disposal
agency or the shop where you bought the appliance.
PARTS
a) Seat
b) Back rest tube
c) Booster cushion
d) Crotch strap
e) Safety harness
f) Structure
g) Wooden base
h) Adjuster handle
i) MP3 pocket
j) Feet
k) Fabric fastener tube
l) Wooden toy bar
m) T oy bar joint
n) Music/lights ON/OFF buttons
o) Toy bar luminous panel
p) Fabric toy
q) Closing lever
ASSEMBLY AND USER INSTRUCTIONS
1. Open the rocking cradle frame by holding onto the tube, as seen
in diag. 1. Take hold of the backrest tube B and insert it in the end of
the frame tube, as seen in diag. 2 until you hear it click into place.
WARNING: Always check that the safety harness straps are inser-
17