Cleaning And Care - Unold EDEL Instrucciones De Uso

14. Caution: If you interrupt the process, the excess water runs back into the
water tank. The ice cubes that are still attached to the cooling linkage will
drop off into the ice container after a while, and can then be taken out.
15. When the ice container is full this symbol
tone sounds.
16. The appliance automatically stops making ice cubes.
17. Remove the ice container and empty it. Insert the ice container back into
the appliance. Please note that you must hold the ice container slightly
slanted when inserting it in the appliance.
18. Then proceed the ice cube making process.
19. In addition, the ice cube maker automatically checks the water level in the
water tank. If the water level is too low, this symbol
20. The appliance automatically stops making ice cubes. Top up water as
described above; in this process pay attention to the MAX mark and do not
overfill the appliance.
21. Close the ice container and press the „ON" button.
22. When this symbol lights up
large ice cubes. Switch off the appliance and wait until the ice cubes have
melted slightly. Then proceed with production of the ice cubes (however,
wait at least 3 minutes before proceeding, to prevent appliance damage).
23. Please remember not to leave the ice cubes in the ice container too long,
since they will melt. If you do not wish to use the ice cubes right away, you
can store them in the freezer.
24. After use, please leave the ice cube maker open to prevent the formation of
mould or bacteria.
The water must be changed after 24 hours at the latest, for reasons of
hygiene.

CLEANING AND CARE

Before cleaning, always turn off the appliance and unplug it from the
electrical outlet.
1. Do not immerse the appliance and power cord in water or other liquids or
wash them in the dishwasher.
2. Wipe off the ice cube maker with a damp cloth inside and out. To do this, it
is best to use a mixture of water and a little household vinegar.
Stand 6.3.2020
Copyright UNOLD AG | www.unold.de
the water tank is blocked due to overly-
(8) lights up and a signal
(9) lights up:
DE
EN
FR
NL
IT
ES
PL
31 von 100