Before Switching On - Premier NV-5516W Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

INSTALLATION

Location

When selecting a position for your Fridge/Freezer you should make sure the floor is flat and firm, and the

room is well ventilated with an average room temperature of between 16

and 32 . Avoid locating

your Fridge/Freezer near a heat source, eg, cooker, boiler or radiator. Also avoid direct sunlight in out-

buildings or sun lounges. If you are placing your Fridge/Freezer in an out-building such as a garage or

annex ensure that the Fridge/Freezer is placed above the damp course, otherwise condensation will

occur on the Fridge/Freezer cabinet. Never place the Fridge/Freezer in a wall recessed or into fitted

cabinets or furniture when your Fridge/Freezer is working, the grille at the back may become hot and the

sides warm. It must therefore be installed so that the back of the Fridge/Freezer has at least 9cm(7/2") of

free space and the sides have 2cm(3/4"). Do not drape the Fridge/Freezer with any covering.

Leveling the Fridge/Freezer

If the Fridge/Freezer is not level, the door and magnetic seal alignment will be affected and may cause

you Fridge/Freezer to work incorrectly. Once the Fridge/Freezer is placed in its final location, adjust the

leveling feet at the front by turning them.

Cleaning before use

Wipe the inside of the Fridge/Freezer with a weak solution of bicarbonate of soda. Then rinse with warm

water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry

completely before replacing in the Fridge/Freezer. The external parts of the Fridge/Freezer can be

cleaned with wax polish. See page 12 for more details on cleaning.

Before plugging in YOU MUST

Check that you have a socket which is compatible with the plug supplied with the Fridge/Freezer. If not

see the section called ELECTRICAL INFORMATION on page 11