Display Data; Delete Data; Send Data To A Printer Or To A Computer; Report Output - Hach sensION+ MM340 Manual Del Usuario

Data logger

Display data

The Display data log contains Measurement data, Electrode report and
Calibration data. The stored data can be send to a printer or to a PC.
When the data log becomes full (400 data points), the oldest data point
is deleted when a new data point is added.
1. Use the and to select Channel 1 or Channel 2 and confirm.
2. From the main menu use the
3. Use the or to select DATA LOGGER and confirm.
4. Use the or to select Display data and confirm.
5. Use the or to select
Option Description
Measurement data Measurement data—stores automatically each time a
sample is measured
Electrode report Electrode report—stores automatically the electrode
history and measurement conditions
Calibration data Calibration data—stores automatically the current
calibration

Delete data

The entire measurement data or electrode report log can be deleted to
remove data that has already been sent to a printer or PC.
1. From the main menu use the
2. Use the or to select DATA LOGGER and confirm.
3. Use the or to select Erase and confirm.
4. Use the or to select Measurement data or Electrode report and
confirm. Confirm again to delete the data.
The entire log is deleted at once.
or to select SYSTEM. Confirm.
or to select SYSTEM. Confirm.

Send data to a printer or to a computer

N O T I C E
The data output (printer or PC) needs to be selected first, so that the Print menu
is available (refer to Select the data output
Note: Refer to

Report output

on page 13 to select the report output type.
1. From the main menu use the
2. Use the or to select DATA LOGGER and confirm.
3. Use the or to select Print and confirm. Select one of the
following options and confirm with
data, Electrode data, Calibration data, Calibration report or
Instrument condit.
Report output
N O T I C E
The data output (printer or PC) needs to be selected first, so that the Type of
report menu is available (refer to Select the data output
Different report output types can be selected when a printer or a PC is
connected.
1. From the main menu use the
2. Use the or to select Type of report and confirm.
3. When a printer or a computer and Terminal is connected, use the
or to select
Option Description
Reduced Select Several or One sample as an output format
on page 11).
or to select SYSTEM. Confirm.
to print the data: Measurement
on page 11).
or to select SYSTEM. Confirm.
English 13