Parrot Zik3 Instrucciones De Uso página 4

itself off. To do so, launch the Parrot Zik application and select
Auto switch off. This option is deactivated by default.
For the Parrot Zik3 to switch off automatically, you must not be charging or
using them. Make sure that the sensor located on the right hand speaker does
not touch anything.
w P Z 3
earIng the arrot Ik
Carefully adjust the headband so the Parrot Zik3 fit comfortably over your ears.
Put the headphones on using the letters (L) and (R) to help you distinguish left
and right, this is printed inside the headband.
The touch sensitive panel is located on the right earcup.
b C
®
luetooth onneCtIon
Before the Parrot Zik3 can be used with your smartphone or Bluetooth
player, the two devices must be paired. Once the two devices have detected
each other it is no longer necessary to pair each time.
1. From your smartphone or Bluetooth
tooth peripherals.
®
2. Select "Parrot Zik3".
3. Enter "0000" on your smartphone or Bluetooth
do so. Depending on your model of smartphone it is possible that a PIN
code will not be required.
Once your smartphone is paired with the Parrot Zik3 the two devices will
connect to each other automatically each time that the Parrot Zik3 is switched
6
English
>Settings >
audio
®
audio player, start a search for Blue-
®
® audio player if asked to
on. It is not possible to simultaneously connect several devices to the Parrot Zik3.
You can activate / deactivate the automatic connection via Bluetooth
Parrot Zik3 to your smartphone. To do so, launch the Parrot Zik application and
select >Settings > Auto-Connection Bluetooth.
nfC
ConneCtIon
If your device supports NFC the Parrot Zik3 can be paired using the NFC tech-
nology. Switch on your Parrot Zik3, enable the NFC option on your Bluetooth
device then put your Bluetooth device in contact with the outside left earcup.
®
of your
®
®
7
English