Unold 87475 Manual De Instrucciones página 26

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
8.
Select the desired temperature
via the temperature buttons. The
temperature can be selected bet-
ween 80 and 200°C in increments
of 10. You have the possibility of
precisely setting the temperature
via the Lower and Higher buttons.
9.
During the heat up time, an eight-
part segment appears in the dis-
play, which rotates clockwise. As
soon as the appliance has reached
the desired temperature, the seg-
ment no longer rotates.
10. Note: Starting at 140°C the blue
display illumination changes to
red illumination.
11. To avoid undesired temperature
adjustment, you can pre-set the
temperature via the "Hold" but-
ton. To do this, select the desired
temperature as described above.
Then press the "Hold" button for
some time until the display returns
to 80°C. Now the appliance heats
up to the pre-set temperature and
holds this temperature. Now it is
no longer possible to adjust the
temperature. Likewise the appli-
ance can no longer be switched
off. If you want to deactivate this
function, press the "Hold" button
again for some time.
12. To achieve an optimal styling
result, wait until the appliance
has heated up to the desired tem-
perature. As soon as the eight-
part segment stops the appliance
is ready for use.
13. When you set the appliance down
to the side during the heat up
26
Copyright UNOLD AG | www.unold.de
phase, only place it on the set-
down bracket.
14. Divide the combed hair into small
strands that should not be wider
than five centimetres. If neces-
sary separate the hair strands with
a bobby pin.
15. Press the lever and place the
strand of hair at the hairline bet-
ween the two smoothing plates.
16. Close the plates by releasing the
lever.
17. Now move the appliance slowly
and uniformly to the tip of the
hair. In this process always keep
the appliance closed firmly. You
should never keep the appliance
longer than two seconds at any
point, so as not to damage your
hair. If you want to get a smooth,
tight-fitting look, when smoothing
the hair strands you must always
stay close to the body. However
if you lift the appliance when
smoothing you get a lot of volume.
18. Switch off the appliance via the
ON/OFF switch (keep it depressed
for several seconds) and unplug
the power cord from the electrical
outlet.
19. Now do not continue to brush or
comb your hair, this can destroy
the styling. Use your fingers to
shape your hair if necessary.
Please bear in mind that the
appliance is extremely hot after
use. Only change the attach-
ments after an appropriate coo-
ling time, to avoid burns.
Tabla de contenido
loading

Tabla de contenido