BABYTREND HC07A Manual De Instrucciones página 6

OPERATION
RECLINE SEAT
13) • Squeeze recline lever on back of the
seat and adjust to the preferred recline
or upright position (Fig. 13).
Use caution not to trap arms, hands and
fingers when adjusting recline positions.
TO ADJUST SEAT HEIGHT
WARNING:
in seat. Adjust seat height before placing your child in
the high chair.
WARNING:
adjustment bracket is level and both left and right
sides are locked before placing child in the high chair.
WARNING:
bracket on the locking pins.
14) • Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 14a) and adjust to the
ideal position (Fig. 14b).
DO NOT adjust with child in the seat.
9
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Do not adjust seat height with child
Always check that the height
Never rest the height adjustment
Highest Position
Lowest Position
Locking Pin
ATTENTION:
Make sure the Height Brackets lock on
the lowest position.
Adjustment Brackets on the Locking Pins
(Fig. 14c).
BRAKES
Fig. 13
15) • To engage brakes, apply downward
pressure to the brake tabs (Fig. 15).
NOTE: Check that the High Chair will
not move and that brakes are properly
applied.
• To release, lift up on the brake tabs.
TO FOLD HIGH CHAIR
The High Chair may be folded with the seat in
any of the height positions.
16) • Place seat in the desired height position.
Release Handle
Place Seat Back in the most upright
position (Fig. 16).
17) • Squeeze the tray release handle and
slide the tray out (Fig. 17).
Fig. 14a
18) • Hang the tray on the hooks located on
the back of the rear legs (Fig. 18).
Fig. 14b
rest Height
DO NOT
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Fig. 14c
Fig. 15
Fig. 16
Tray Release located underneath tray
Fig. 17
10
Fig. 18