Warning - BABYTREND HC07A Manual De Instrucciones

WARNING

WARNING:
the instructions could result in serious injury or death.
FALL HAZARD:
head injuries including skull fractures when falling from
high chairs. Falls can happen suddenly if child is not
restrained properly.
• ALWAYS use restraints, and adjust to fit snugly.
• Tray is not designed to hold child in chair.
• Stay NEAR and watch child during use.
• NEVER allow child to push away from table.
STRANGULATION HAZARD:
Do not place High Chair in any location in any location
where there are cords, such as a window blind cords,
drapes, phone cords etc.
WARNING:
the high chair at all times by the 5-point restraining
system, either in the reclining, semi-reclining or upright
position. The tray is not designed to hold the child
in the chair. It is recommended that the high chair be
used in the upright position only by children capable of
sitting upright unassisted. See page 8 for instructions
on proper use of restraint system.
• Other accessory items may change the balance of the high chair and
cause hazardous unstable conditions.
• Be certain the high chair is fully erect and latched in the open position
before allowing the child near the high chair.
• This high chair is designed to be used by a child with a maximum weight
of 40 pounds, (18.14 kg).
• The maximum weight that can be carried in the basket is 5 lb. Excessive
weight may cause a hazardous unstable condition to exist.
• allow your high chair to be used as a toy.
NEVER
• use this product if there are any loose or missing fasteners, loose
NEVER
joints, broken parts, or torn mesh/fabric. Check before assembly and
periodically during use. Contact Baby Trend Customer Service at 1-800-
328-7363 for replacement parts, repair or instructions.
parts.
3
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Failure to follow these warnings and
Children have suffered severe
The child should be secured in
NEVER
IMPORTANT!
follow these instructions carefully. Please keep these instructions for
future reference.
IMPORTANT!
for damaged hardware, loose joints, missing parts or sharp edges. NEVER
use if any parts are missing or broken.
IMPORTANT!
IMPORTANT!
open position before using.
ATTENTION:
Carefully remove parts from box. Check that
you have all the parts for this model before
assembling the high chair.
High Chair models are packaged with the
High Chair Seat Fabric and Seat Insert
already attached to the Seat Back.
TO ASSEMBLE SEAT
1) • Place the Seat Base on a flat surface.
2) • Join the Seat Back to the Seat Base us-
ing the Seat Back Hinge Rod (Fig. 2a).
To install the hinge rod, press down on
the hinge rod retainer and insert the rod
into the hinge from right to left (Fig. 2b).
substitute
To ensure safe operation of your product, please
Before assembly and each use, inspect this product
Adult assembly is required.
Always check that the high chair is locked in the
Certain
NOTE:
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Seat Back
Seat Base
Fig. 2a
Seat Back Hinge Rod
Hinge rod retainer
Fig. 2b
4