Intended Use; Warnings On The Documentation; Essential Safety Rules; Product Identification - AERMEC WSA Serie Manual Técnico De Instalación Y Mantenimiento

Enfriadora agua
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

1. 1

INTENDED USE

WSA AERMEC chillers have been built
according to the technical standards and
the recognised safety regulations. These
units have been designed and manufac-
tured for cooling and must be used ac-
cordingly, and taking into account their
performance characteristics. There may
still arise risks for the safety of the user
or third parties, or even damage to the
units and other objects, in case of impro-
per use.
Any use not specifically indicated in this
manual is forbidden. Therefore, AERMEC
Remember that the use of products that
use electric power and water carries the
compliance with some essential safety
rules such as:
The use of this unit is not intended
for people (including children) with
any physical or mental disability or
any sensory impairment nor for pe-
ople lacking experience and know-
ledge, unless they are supervised or
instructed on the use of the unit by
a person responsible for their safety.
Children should be supervised in or-
der to make sure that they do not
play with the unit.
WSA can be identified by:
- Packaging label
that includes the product identifica-
tion data
- Technical card
Placed on the electronic box side sill.
NOTE
If the identification plate, or any other
means to identify the product, is tam-
pered with, removed or missing, instal-
lation and maintenance operations are
hampered

WARNINGS ON THE DOCUMENTATION

1
shall not be held responsible for any
damage whatsoever resulting from the
non-compliance with these instructions
1.2
STORAGE OF THE DOCUMEN-
TATION
Deliver the following installation instruc-
tions with all the complementary docu-
mentation to the user of the unit, who
shall be responsible for keeping the in-
structions so that they are always availa-
ble when needed.
READ CAREFULLY THIS CHAPTER, the
unit must be installed by qualified skilled

ESSENTIAL SAFETY RULES

2
It is forbidden to carry out any tech-
nical or maintenance operation be-
fore disconnecting the unit from the
mains by positioning the system and
control panel main switches on "off".
It is forbidden to modify safety or re-
gulation devices without the manufac-
turer's authorisation and indications
It is forbidden to pull, disconnect or
twist the outcropping electrical ca-
bles of the unit even if it has been di-
sconnected from the mains
It is forbidden to leave containers
and flammable substances near the
chiller.

PRODUCT IDENTIFICATION

3
personnel, in compliance with the natio-
nal legislation in force in the country of
destination.
The unit must be installed in such a way
as to make all maintenance and/or re-
pair operations possible. The warranty
of the device does not in any case cover
costs incurred as a result of motorised
ladders, scaffolding or any other lifting sy-
stems made necessary to carry out the
operations under warranty.
The warranty shall not be valid if the indi-
cations mentioned above are not obser-
ved.
It is forbidden to touch the unit with
wet parts of the body and bare feet.
It is forbidden to open the access do-
ors to the unit internal parts, without
having first turned off the system
main switch.
It is forbidden to spread, leave or
keep the packaging material within
the reach of children as it may be a
possible source of danger.
PACKAGING
LABEL
TECHNICAL
CARD
AE R M E C SP A - via R oma 44
37040 - B evilacqua (V R ) - I T AL I A
S R P 14T
00
01/2008
M O D.
vers.
P rod. date
3/N/P E ~400V
50H z
Serial no
S R P 00007
I P
24
13.65
P t = kW
P f = kW
C A L DO
F R E DDO
3.30
HE A T
P e = kW
C OL D
P e = kW
7.10
C HA UD
I n = A
F R OI D
I n = A
46.0
HE I ZUNG
I s = A
K UHL UNG
I s = A
-20 / -20
28 / 22
M in.
P S (H P /L P )
bar
T S(H P /L P )
C
130 / 52
5.0
M ax.
R 407C
K g
R E S.E L /E L .HE AT E R
18.3
11.5
I n R x
max
= A
kW
max
=
31
R E S.E L /E -HE I ZUNG
I tot
max
= A
5

Capítulos

Tabla de contenido
loading

Tabla de contenido