Product Assembly; Parts And Components; Before Use - cecotec HYDROSTEAM 1030 ACTIVE Manual De Instrucciones

ENGLISH
appliance.
Do not use the device if it is short-circuiting.
The device uses hot steam to disinfect the area, which
means that the safety valve, the steam nozzle and
the ironing-brush mop may become very hot during
operation.

2. PARTS AND COMPONENTS

Fig. 1
1. Safety valve
2. Child-safety lock
3. Small nozzle
4. Steam-releasing trigger
5. Power cord
6. Cord protector
7. Power indicator
8. Big nozzle
9. Bent nozzle
10. Nylon brush
11. Funnel
12. Measuring cup
13. Mop for ironing brush
14. Ironing brush
15. Brush for glass
16. Steam hose

3. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
14 HYDROSTEAM 1030 ACTIVE

4. PRODUCT ASSEMBLY

How to assemble the steam hose into the small and big nozzle:
Fig. 2
Install the steam hose into the small nozzle. Turn the connecting part of the steam hose
clockwise and make sure it is perfectly tight.
Connect the steam hose with the big nozzle and turn it clockwise. Make sure it is also
assembled tightly.
How to open the safety valve:
Fig. 3
Unplug the device from the socket.
Release all the steam inside the water tank until there is no more steam coming out.
Turn the safety valve clockwise. If you it feels too tight, do not turn it using too much strength.
Please wait for 2 minutes and try again as this may provoke that the valve gets blocked.
Take it out and add water again. If the steamer will not be used anymore, remove all the water
from the device's water tank.
5. OPERATION
Fig. 4
Turn the safety valve counterclockwise and take it off.
Check if there is water inside the water tank (in case you have already used the device).
Use the measuring cup to add one cup pf water.
Fig. 5
Put the safety valve back and turn it clockwise until its tight. Do not turn it too strongly, as it
may damage the screw thread.
Plug the power cord into the nearest socket.
When the power indicator light turns red, it means that the device is creating steam.
Fig. 6
You will be able to use the device when the power indicator light becomes green.
Push the safety lock.
Push the trigger gently, with the thumb on the safety lock.
ENGLISH
HYDROSTEAM 1030 ACTIVE 15