Technical Data; Parts Of The Device; Operation - Festool MX 1200 RE EF HS3R Instrucciones De Servicio Originales

English
4

Technical data

Stirrer
Voltage
Frequency
Power consumption
Idling speed
Electronic speed preselection
Temperature-dependent overload protection
Tool adapter
Stirrer – max. dia.
Collet dia.
Weight as per EPTA procedure 01:2014
5

Parts of the device

[1-1] Hoop guard
[1-2]
Right handle
[1-3] Switch with switch guard
[1-4] Locking button
[1-5] Speed control
[1-6] Vents
[1-7]
Left handle
[1-8] Dust extraction system MX-A
[1-9]
Flange
[1-10] Adapter ErgoFix
[1-11] Sleeve
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin­
ning of the Operating Instructions.
[2] ErgoFix adapter as delivered pre-installed in sleeve [1-11].
16
[2]
MX 1000 RE EF
220–240 V
50–60 Hz
1020 W
360–630 rpm
o
-
M14x2/ErgoFix
120 mm
57 mm
4.6 kg
6

Operation

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
WARNING
Hazardous dust
► Wear a dust mask.
WARNING
Risk of injury, electric shock
► Allow the power tool to acclimatise before
use.
6.1 Tightening the stirrer (see figure 2)
► Screw in the stirrer [2-1] with endpiece
M14x2 (wrench size 22) by turning it to the
MX 1200 RE EF
220–240 V
50–60 Hz
1200 W
360–630 rpm
o
o
M14x2/ErgoFix
140 mm
57 mm
4.6 kg