:
Put the unit on the ground. Check
that bystanders are well clear of the
general work area and the nozzle.
:
Make sure you have a firm footing:
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
BR 420
:
Pull the starter grip slowly with your
right hand until you feel it engage
and give it a brisk strong pull. Do not
pull the starter rope out all the way
as it might otherwise break.
:
Do not let the starter grip snap back.
:
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
English / USA
When engine begins to fire:
:
If engine is cold:
Turn choke knob to e and continue
cranking until engine runs.
:
If engine is warm:
Continue cranking until engine runs.
17