3. The maximum capacity for ingredients is
0.5 l. Do not exceed this quantity, in order
not to damage the appliance. Also take into
account that many foods, such as meat,
increase in volume as a result of chopping.
4. Make sure that the mixing bowl is seated
correctly on the appliance base.
5. Remove the blade guard from the chopping
blade.
Do not touch the blades; they are very
sharp. Danger of injury.
6. Place the chopping blade carefully onto the
shaft in the mixing bowl.
7. Caution: both the shaft in the appliance and
the inside of the utensils have a flattened
side. All utensils can be inserted only if both
flattened sides are aligned.
8. Fill the desired ingredients into the mixing
bowl. Be careful not to overfill the bowl.
9. Caution: If you want to knead dough, first
put all dry ingredients into the mixing bowl.
using the mixing blaDe
1. Read the information in the chapter on
"Using the chopping blade".
2. Place the mixing blade carefully onto the
shaft in the mixing bowl.
3. Caution: both the shaft in the appliance and
the inside of the utensils have a flattened
side. All utensils can be inserted only if both
flattened sides are aligned.
4. Fill the desired ingredients into the mixing
bowl. Be careful not to overfill the bowl.
5. Place the lid on the bowl and lock it into
place.
6. Plug the power cord into an electrical outlet.
20
For mixing, whipping
cream, beating egg whites and making sponge batter. If you use ultra-high
temperature cream, refrigerate it first for several hours before whipping.
Then add the required liquid by pouring it
through the filling shaft while the appliance
is mixing.
10. Place the lid on the bowl and lock it into
place.
11. Plug the power cord into an electrical outlet.
12. Switch on the appliance by setting the
switch to „On". The blade starts to turn.
You can also press the "Off/Pulse" button,
in which case the appliance will operate in
short, powerful bursts. Use the Pulse switch
only in intervals; if you work longer than five
minutes, use the continuous function.
13. If ingredients stick to the inside of the
mixing bowl, switch off the appliance,
unplug it from the power supply and then
loosen the ingredients using a spatula.
14. When the ingredients have reached the
desired consistency, switch the appliance
off by means of the "Off/Pulse" switch and
unplug it from the power supply.
15. Wait until the chopping blade has stopped
moving.
16. Remove the lid.
17. Carefully remove the chopping blade from
the bowl. Do not touch the blades; they are
very sharp. Danger of injury.
18. Empty the ingredients from the mixing bowl.
19. As soon as all parts have been cleaned, put
the blade guard back on the chopping blade
to prevent injuries.
7. Switch on the appliance by setting the
switch to „On". The mixing blade starts to
turn. You can also press the "Off/Pulse"
button, in which case the appliance will
operate in short, powerful bursts. Use the
Pulse switch only in intervals of five to ten
seconds.
8. If ingredients stick to the inside of the
mixing bowl, switch off the appliance,
unplug it from the power supply and then
loosen the ingredients using a spatula.
9. When the ingredients have reached the
desired consistency, switch the appliance