Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COMPLETING
THE SET UP
Now that you have your new refrigerator
installed in place, you are ready to set up and enjoy the features
and functions
of the appliance.
By completing
the following steps, your refrigerator
should be fully
operational.
1. Make sure your refrigerator
is in an appropriate
location with reasonable
clearance
between
it and the
wall. Refer to installation
instructions
in this manual.
2. Once the refrigerator
is plugged
in, make sure the interior light comes on when you open the doors.
3. Set the Temperature
control to the coldest temperature
and wait for an hour. The freezer will get slightly
chilled and the motor will run smoothly.
Reset the refrigerator
and freezer to the temperatures
you want.
4. After you plug the refrigerator
in, it will take a few hours to reach the appropriate
temperature.
You can
store food and drinks in the refrigerator
after the temperature
is sufficiently cool.
If condensation
or water drops appears on both sides of fridge door's central part, turn the Energy
Saver mode off after removing the condensation.
(See the explanation
on Energy Saver button in the USING THE CONTROL
PANEL.)
20 Settinr_ Up
Tabla de contenido
