Tabla de contenido
Idiomas disponibles
Idiomas disponibles
REATTACHING THE REFRIGERATOR
DOORS
4. Connect
the water line ((_)
and then insert a clip
on the coupler with pulling tube. Connect
the one
connector
((_)
on left side door, the other connector
(1_) on right side door and two connectors
(1_}) at
each side of the top cap.
[_
The clip is enveloped
inside of the top cap.
Door
Tube
.
Position the top table (l_)
in place. Insert the 3
screws into the top table, and tighten with a philips
screw driver (+). Open the door, reinsert the cap top
table ((_) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the hinge cover.
_
fter assembling, close the door and check to see
whether the door has gaps between gaskets or is
tilted. If they are, please refer to "Adjusting the level" on
page 15.
Sett _g Up 13
Tabla de contenido
