Setup And Spare Parts List; Residual Risks - Kerbl 18870 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63

6. Setup and spare parts list

Item number
Description
18871
Motor/transmission unit for CowCleaner Swing 18870
18785
Motor/transmission unit for CowCleaner Swing 18770
18771
Replacement brush, 1m reel, green/red for 18770 and 18870
18773
Plastic casing, large, for printed circuit board (18770 + 18870)
18775
Circuit board for CowCleaner Swing 18770 and 18870
18781
Plastic casing, small, for movement sensor (18770 + 18870)
18777
Sensor for CowCleaner Swing 18770 and 18870
18778
Cable, length 2.50m, for CowCleaner Swing 18770 + 18870
18784
Mounting bracket with bearing and circlip for 18770 + 18870
18787
Shaft, 1 m, round for 18770 and 18870
18788
Hanger for CowCleaner Swing 18770 + 18870
187016
Motor capacitor 16 µF 450 VAC, 50-60Hz
18874
Metal casing for 18870
18876
UCFL 205 bearing for 18770 and 18870

7. Residual risks

Risks for persons:
under the following circumstances, the safety of persons and material objects can be endangered:
• if the safety devices on moving parts have been removed.
• if any damage to the control system is not repaired immediately.
• if untrained personnel are working on electronic parts.
• if the machine is activated before being secured properly to a wall or pillar (for testing or demonstration reasons).
The following points summarise further measures aimed at protecting against personal and material risks:
• ensure that the machine, the control devices and the brushes are not damaged during transport and installation.
• mount the machine in a place that is well ventilated and free from electromagnetic interference.
• the personnel responsible must be trained in the use and maintenance of the machine.
Risk for animals:
under the following circumstances, the safety of the cattle can be endangered:
• the animals are not yet fully mature.
• the cattle are of an unusually small breed.
– > the switch-off resistance can be set too high.
• the animals have collars and/or tail hairs that are too long.
• the animals' hides are more than 5 cm long.
• the customer has not protected the current-carrying parts (cables) adequately / at all against biting.
Important: the length of the cattle's tail hairs must not exceed 5 cm!
41
Tabla de contenido
loading

Este manual también es adecuado para:

Swing18770

Tabla de contenido