Mitsubishi Electric MLZ-KA25VA Manual De Instrucciones página 5

S
ELECTING OPERATION MODES
1
2
3
or
Operation indicator lamp
Indication
The unit is operating to reach the set
temperature
ing the set temperature
When the remote controller cannot be used...
with the remote controller
Room temperature
If you do not want to use this function, please consult the service repre-
perature
sentative because the setting of the unit needs to be changed.
set temperature
—
Water may condense when HEAT is operated with other units within 3 hours
after COOL/DRY operation is stopped.
To prevent water condensation, perform HEAT with temperature set to 16°C
for about 30 minutes after COOL/DRY operation.
AUTO mode (Auto changeover)
from the set temperature for more than 15 minut
Note:
COOL mode
DRY mode
HEAT mode
Emergency operation
Operation indicator lamp
Stop
Note:
Auto restart function
Multi system operation
mo
En-4