Maintenance And Care - Stihl FSB-KM Manual De Instrucciones

English
Turn the machine over.
N
Press down the cap on the spool as
N
far as stop.
Pull the ends of the lines out of the
N
spool.
If the spool is empty, refill with nylon line.
All other mowing heads
Refer to the leaflet supplied with the
mowing head.
WARNING
To reduce the risk of injury, always shut
off the engine before adjusting the nylon
mowing line by hand.
Replacing Nylon Line
STIHL DuroCut
WARNING
To reduce the risk of injury, always shut
off the engine before refilling the mowing
head.
Fit nylon line in the mowing head as
N
described in the instructions
supplied.
Replacing Cutting Blades
STIHL PolyCut
Always check the mowing head for signs
of wear before installing new cutting
blades.
18
WARNING
If there are signs of serious wear,
replace the complete mowing head.
The thermoplastic cutting blades are
referred to as "blades" in the following.
The mowing head is supplied with
illustrated instructions for replacing the
blades. Keep the instructions for the
mowing head in a safe place.
WARNING
To reduce the risk of injury, always shut
off the engine before installing the
blades.
Remove the mowing head.
N
Replace blades as shown in the
N
illustrated instructions.
Mount the mowing head on the
N
machine.

Maintenance and Care

The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
Retighten if necessary
N
Cutting attachments
Check condition, check tightness
N
before starting work and after every
fueling stop
Replace if damaged
N
Safety labels
Replace illegible safety labels
N
FSB-KM