Troubleshooting; Warranty - Alto SQ 691-9M/B1 Instrucciones De Manejo

TROUBLESHOOTING

Problem
‡ Motor not running.
‡ Audible warning signal
(reduced suction pow-
er) triggered.

WARRANTY

Cause
> Circuit breaker in the
cleaner socket has trig-
gered.
> Overload protection
has triggered.
> Intake air filter
cassette is restricted
> Suction regulator
setting is too low.
> Suction hose is
restricted or kinked.
> Filter element is re-
stricted.
> Water level in the tank
has dropped under the
"MIN" mark.
T T T T T he warranty stated in our general sales conditions
applies.
Technical modifications reserved.
Remedy
• Reset the circuit brea-
ker.
• Shut the cleaner off and
allow it to cool for
approx. 5 min. If the
cleaner does not auto-
matically restart again,
contact your after-sales
service.
• Have repaired by your
after-sales service.
• Adjust the suction regu-
lator clockwise.
• Clean the suction hose
or undo the kink. If
suction hose is dam-
aged >> use a new
suction hose.
ð see "Renewal of the
•
filter element".
• Fill water up to the
"MAX" mark ð see
"Starting up".
15