Tabla de contenido
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
The KSR5 uses 2 antennae (touch sensors) to detect obstacles. Upon detection, it will move backward and
follow a two-step manoeuvre to help it overcome the obstacle. This manoeuvre can be determined by means of
jumpers.
The Kit comes complete with 2 sets of differently designed legs, which move in their own distinct way. Fun and
excitement are guaranteed.
The KSR5 requires four 1.5Vdc AAA-batteries (not included).
Apart from the batteries, you will also need a pair of long-nose pliers, a soldering iron, a diagonal cutter, a
screwdriver, a soldering iron and a length of solder wire.
2.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
3.
Electronic Parts List
1.
resistor: 4x 10 (brown/black/black/gold)
9x 10K (brown/black/orange/gold)
4x 22K (red/red/orange/gold)
2x 1M (brown/black/green/gold)
2. ceramic capacitor: 1x type 103, 8x type 104
3. electrolytic capacitor 0.47µf (3x) & 10µf
(1x)
4. LED 5mm, 2 x red, 2 x green
5. LED holder (4x)
6. jumper wire (16x)
7. diode 1N4004 (6x)
8. pin header (2 pins) (1x)
9. female header (2 pins) (1x)
10. pin header (2 pins) (11x)
11. battery connector (1x)
12. transistor: 4x 8050, 4x 8550, 4x C945
13. IC type 74LS109AP (2x), 74HC157AP (3x)
14. IC socket 16 pins (5x)
15. IC type 555 (1x)
16. IC socket 8 pins (1x)
17. jumper (10x)
18. pin (4x)
19. tactile switch (2x)
20. connector with wire: 1 x yellow, 1 x green,
21. 21. slide switch (1x)
22. 22. battery holder (1x)
23. 23. PCB
V. 02 – 09/02/2018
USER MANUAL
1 x orange, 1 x blue
KSR5
Fig. 1
2
©Velleman nv
Tabla de contenido
