Warning Indicators; Cleaning And Care - Domo Piet DO9162W Manual De Instrucciones

DO9162W
BATTERY
2 pcs of AAA 1.5V battery.
REPLACING THE BATTERY
Open the lid of the battery compartment at the bottom of your scale.
Place 2 x 1.5V AAA batteries in the compartment, with the plus side at the + sign.
First place the flat side of the battery against the spring and then push the other side
down.
TO OPERATE SCALE
Place a bowl on the scale before turning on the unit.
Press and release ON/OFF button to turn on the unit.
Wait until LCD shows all information.
TO CONVERT WEIGHT UNITS
Your scale has both measuring system of Metric (kilograms, grams) and Imperial
(pounds, ounces), you can press UNIT to convert between two systems during the
course of weighing.
'ZERO' or 'TARE' FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put the
first load on the scale, get weight reading. Press Z/T button to reset the LCD, reading
'0' before adding next load.
AUTO SHUT OFF
Auto shut-off occurs if display shows '0' or shows the same weight reading for 2
minutes.
To maximize battery life, always press ON/OFF again to turn off the scale after using.

WARNING INDICATORS

LO : Replace battery.
ERR : Scale overload. Remove item to avoid damage.

CLEANING AND CARE

Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use
chemical/abrasive cleaning agents.