Mobicool A40 Instrucciones De Uso página 15

A40
➤ Check that all hose lines and all connections are in a technically perfect
condition at regular intervals.
➤ To switch off the cooler, first close the valve on the gas cylinder and then
turn the rotary switch (fig. 2 2, page 3) completely shut in a clockwise
direction.
Replacing the gas cylinder
!
WARNING!
 Only change the gas cylinder in well ventilated areas.
 Pay attention that when changing the gas container which
shall be carried out away from any source of ignition.
 Only change the gas cylinder when the cooler is switched off.
➤ Switch off the cooler by completely shutting the rotary switch (fig. 2 2,
page 3) by turning it clockwise.
➤ Completely close the valve on the gas cylinder.
➤ Unscrew the valve from the gas cylinder.
➤ Check the condition of the hose line.
Replace the hose line if the material is brittle or porous.
➤ Screw the pressure reduction valve tightly onto the new gas cylinder.
Defrosting the cooler
Humidity can form frost in the interior of the cooler. This reduces the cooling
capacity. Defrost the device in good time to avoid this.
A
NOTICE!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooler.
➤ Place them in another cooling device to keep them cool, if necessary.
➤ Switch the cooler off.
➤ Leave the cover open.
➤ When everything has defrosted, empty the cooler and wipe it out.
EN
Operating the cooler
15