WARNING:
The manufacturer has made every effort to eliminate any sharp edges. However, you
should handle all components with care to avoid accidental injury.
ASSEMBLY
Please read all instructions thoroughly before proceeding. Find a large, clean area in which to
assemble your BLACKSTONE DASH. Please refer to the parts list and assembly diagram as neces-
sary. BLACKSTONE DASH assembly involves large components; therefore, it is advised to have two
people set up the unit.
NOTICE: Make sure all the plastic protection is removed before assembling
VIDEO ASSEMBLY
Watch an actual BLACKSTONE DASH assembly. Use a QR Code App
and scan the QR code. tYou will be taken to the DASH resource page.
You can also visit this page at www.blackstoneproducts.com/dash
Step 1
Remove contents from within the DASH body. Lock the hood and place the body of the DASH upside
down on a soft surface.
10
Step 2
Remove one of the two bent leg joints from the nesting underneath the DASH body.
Insert it into the leg socket, pressing the spring button. The spring button will pop back out once it is
properly aligned with hole in the leg socket.
Step 3
Remove leg extension from the nesting underneath the body of the DASH.
Screw the leg extension into the prior leg joint. Twist by hand until tight.
Leg Socket
Bent Leg Joint
Leg Joint
Leg Extension
11