Connect With Pc - Panacom T-i7yUP Manual Del Usuario

9.1 Camera
If the cursur is at
Click to take picture.
Click to enter the
Click to set the scene mode, Picture size, Picture quality, and
color effect.
Click to select back or front camera.
9.2 Dv
Click to enter the mode select
If the cursur is at
Click to start recording.
Click to set the color effect or restore to default settings.
10. Connect with external device

10.1. Connect with PC

Connect the device with the PC via the USB cable. The PC appears
two new disk symbols after connected successfully. One is the TF
card, and the other is the built-in flash.
Pg. 12
postion, the device is at Camera mode.
setting interface
position, the device is at DV mode.
interface