Belkin F5D8051 Manual De Usuario página 34

Troubleshooting
Installation CD-ROM does not start Belkin
Wireless Networking Utility.
If the CD-ROM does not start the Belkin Wireless Networking
Utility automatically, it could be that the computer is running other
applications that are interfering with the CD drive. If the Belkin
Wireless Networking Utility screen does not appear within 15-20
seconds, open up your CD-ROM drive by double-clicking on the
"My Computer" icon. Next, double-click on the CD-ROM drive in
which the Installation CD has been placed to start the installation.
If the installation does not start automatically, right-click to select
"Explore", then double-click on the icon named "setup.exe".
Power LED does not come ON; Adapter is not working.
If the LED indicators are not ON, the problem may be that the
Adapter is not connected or installed properly. Verify that the
Adapter is plugged firmly into the USB port of your computer.
Check to see that the drivers for the Adapter have been installed.
Right-click on the "My Computer" icon on your desktop. Choose
"Properties" and navigate to the "Device Manager" and see if
your USB Network Adapter is listed without any errors. If an error
is indicated, contact Belkin Technical Support.
Link LED is blinking slowly; I cannot connect
to a wireless network or the Internet.
If your Adapter appears to be functioning properly, but you
cannot connect to a network or you have a red wireless icon
at the bottom of your screen, the problem may be that there is
a mismatch between the network name (SSID) settings in your
wireless network properties.
Check the SSID settings to see if they match. The SSID is case-
sensitive and the spelling on each computer must be exactly the
same in order for the Adapter to connect to the wireless router
(or access point).
Note: To check the SSID settings or look for an available
network, double-click the Signal Indicator icon to bring up the
"Wireless Networks" screen. Click "Add" if you do not see the
network you are trying to connect to and type in the SSID.
For more information about setting up an SSID, please reference
your router manufacturer's user manual. If issues persist even at
close range, please contact Belkin Technical Support.
32 32