Hot
Surfaces
PUMP
FIG. 2
CYLNDER
AND
OUTLET TUBE
CHECK
/
VALVE
/
CHECK
OUTLET TUBE
VALVE
Definitions:
Safety
Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
`&DANGER:
Indicates an imminently
hazardous
situation which, ff not avoided, wifl result in death
or serious
injury.
AWARNING:
Indicates
a potentially
hazardous
situation which, ff not avoided, could result in death
or serious injury.
,&CAUTION:
Indicates
a potentially
hazardous
situation which, ff not avoided, may result in minor
or moderate injury.
CAUTION:
Used without the safety alert symbol
indicates a potentially hazardous situation which, ff
not avoided, may result in property
damage.
IF YOU
HAVE ANY
QUESTIONS
OR COMMENTS
ABOUT
THIS
OR ANY
DEWALT TOOL,
CALL
US TOLL
FREE
AT:
I=800=4=DEWALT (1-800=433=9258)
Important
Safety
Instructions
_, WARNING: Do not operate this unit until you read and understand
this instruction
manual
for safety, operation
and maintenance
instructions.
AWARNING:
Some dust created by power sanding, sawing, grind-
ing, drilling, and other construction
activities contains chemicals
known to the State of California to cause cancer, birth defects or other
reproductive harm. Some example of these chemicals are:
* lead from lead-based paints
* crystalline
silica from bricks and cement and other masonry
products
* arsenic and chromium from chemically-treated
lumber
Your risk from these exposures varies, depending
on how often
you do this type of work. To reduce your exposure to these chemi-
cals: work in a weft ventilated area, and work with approved safety
equipment, always wear OSHA/MSHA/NIOSH
approved, properly
fitting face mask or respirator when using such tools.
When using air tools, basic safety precautions should always be fol-
lowed to reduce the risk of of personal injury,
_ WARNING: This product
contains
chemicals,
including
lead,
known
to the State of California
to cause cancer, and birth
defects or other reproductive
harm. Wash hands after handling.
SAVE
THESE
INSTRUCTION