Operating Data - baltur ACS 355 Guía De Iniciación

Operating Data

Cod. Description
9902 APPLIC MACRO
9905 MOTOR NOM VOLT
9906 MOTOR NOM CURR
9907 MOTOR NOM FREQ
9908 MOTOR NOM SPEED
9909 MOTOR NOM POWER
1001 EXT 1 COMMANDS
1003 DIRECTION
1104 EXT REF 1 MIN
1105 EXT REF 1 MAX
1201 CONST SPEED SEL
1202 CONST SPEED 1
1302 AI1 MAX.
2003 MAX CURRENT
2008 MAXIMUM FREQ
2606 LOW NOISE
Safety
WARNING! Only qualified electricians are allowed to maintain the drive. Read the safety instructions in chapter Safety
on the first pages before you work with the drive.
Alarm and fault indications
Fault is indicated with a red LED. See section LEDs on page 271 of the uesr manual. An alarm or fault message on the panel
display indicates abnormal drive status. Using the information given in this chapter most alarm and fault causes can be identified
and corrected. If not, contact an ABB representative. The four digit code number in parenthesis after the alarm/fault is for the
fieldbus communication. (See chapters Fieldbus control with embedded fieldbus and Fieldbus control with fieldbus adapter.)
How to reset
The drive can be reset either by pressing the keypad key
through digital input or fieldbus, or by switching the supply voltage off for a while. The source for the fault reset signal is selected
by parameter 1604FAULT RESET SEL. When the fault has been removed, the motor can be restarted.
Fault history
When a fault is detected, it is stored in the Fault History. The latest faults and alarms are stored together with the time stamp.
Parameters 0401 LAST FAULT, 0412 PREVIOUS FAULT 1 and 0413 PREVIOUS FAULT 2 store the most recent faults. Parame-
ters 0404...0409 show drive operation data at the time the latest fault occurred. The Assistant Control Panel provides additional
information about the fault history. See section Fault Logger mode on page 74 of the uesr manual for more information.
BGN 300 Lx-V
1
400
15
50
2910
7,5
2
1
50
50
3
50
83
15,4
50
8
RESET
EXIT
(Basic Control Panel) or
23 / 58
0006081262_200906
FREQUENCY CONVERTER
Model
BGN 390 Lx-V BGN 540 Lx-V
1
400
15
50
2910
7,5
2
1
50
50
3
50
83
15,4
50
8
RESET
(Assistant Control Panel),
1
400
28
50
2930
15
2
1
50
50
3
50
83
27,5
50
8