Philips SBC VL1405 Manual Del Usuario página 6

6 ENGLISH
Functional overview -
Product illustrations on inside flap
A)Transmitter unit SBC VL1400 (not supplied)
1 Power button
switches the transmitter between stand-by and on.
2 Power light
lights red in stand-by mode, green when power is on, flashes when
receiving remote control commands
3 COPY SOURCE button
links SCART input 1,2,3 or SCART OUT to SCART in/output 4.
4 Copy source indication lights
indicate which SCART input (1,2 or 3) is linked to SCART in/output 4.
When there is no light indication the SCART OUT is linked to
SCART in/output 4.
5 VIEW SOURCE button
selects which SCART input (1-4) is viewed on the transmitter
SCART output
6 View source indication display
indicates the SCART input number that is viewed on the transmitter
output.
7 AUTO light
indicates if automatic SCART switching is enabled (on) or disabled (off).
8 Infra-red remote control blaster lights
transmit infra-red remote control signals from the receiver to the video
source devices below.
9 Transmission channel switch
switches the frequency channel of the audio/video signal to minimize
interference.
10 SCART input (1-4) connectors
for connection to SCART-enabled video source devices
11 SCART output connector
for connection to the main TV
12 RCA sound output connector
for connection to an audio amplifier
13 DC power input
for connection to the mains
14 Remote control blaster cord connector
15 Remote control blaster cord
four infra-red lights used instead of the infra-red remote control blaster
lights (A-8) for a more precise control of the video sources.
16 SCART cable
17 Power adapter
18 Remote control antenna