Promax 10 premium Guía De Usuario página 74

In the TRANSIENT DETECTOR mode, the PROMAX-10
as a transitory counter in the return path. The level detection threshold and
the frequency margin are user definable.
The TILT operating mode shows on the display, both graphically and
numerically, the level difference between any four channels, previously
defined as pilot channels, in order to obtain information about band
equalisation. This function can be applied to the forward band and to the
return path, independently.
To access any operating mode, simply press the corresponding key.
The parameters relative to a particular operating mode can be modified through
the configuration menu associated to the mode. In order to access the configuration
menu associated to a particular operating mode, simply press the CONFIG key [14].
Some modes have more than one configuration page, to access to the second page it is
necessary to press the CONFIG key again. The general parameters of configuration
(selecting/editing the channel plan, measurement units, language, etc.) can be changed
through the Global Configuration Menu, to which it is accessd by pressing again the
CONFIG key [14]. To leave a configuration menu, just press the key of the operating
mode you wish to access.
Figure 4.- Accessing the PROMAX-10
Page 14
USER'S MANUAL. PROMAX-10
Premium
Premium configuration menus.
Premium
operates
11/2008