Setting Acoustic Features - Clarion DVH940 Manual De Instrucciones

Operations (DXZ745MP)
4. Turn the [ROTARY] knob clockwise or
counterclockwise to adjust each value.
5. Press the [ADJ] button to return to the
original mode.
8
DVH940

Setting Acoustic Features

Turning speakers on or off
(SP-SEL)
The center speaker, rear (surround) speakers
and sub woofer have to be set to on or off to
achieve maximum sound quality.
• The initial setting is [ON].
1. Press and hold the [ADJ] button for 1 second
or longer to enter adjust mode.
2. Press the [a] or [d] button to change to
the [SP-SEL E] display.
3. Press the [ENT] button to display the
adjustment item.
Press the [a] or [d] button to select
[CENTER-SP], [SURROUND-SP] or [SUB-
WOOFER].
• CENTER-SP: center speaker
• SURROUND-SP: rear (surround) speaker
• SUB-WOOFER: subwoofer
4. Turn the [ROTARY] knob clockwise or
counterclockwise to select [ON] or [OFF].
• ON: Speaker installed
• OFF: Speaker not installed
• When a sub woofer is used, set [ON+],
[ON-] or [OFF]. The normal setting is
[ON+], but use the [ON-] setting when this
provides a better effect for low frequency
range.
5. Press the [ADJ] button to return to the
original mode.
Setting speaker filter
frequency (FILTER)
This function is used to set a filter frequency that
suits the frequency characteristics of the used
speakers.
• The initial value of [FRONT HPF], [SRD HPF]
is [THRGH] (no filter).
• The initial value of [CENTER HPF], [SUB-W
LPF] is [120 Hz]
• A speaker that was turned off in the Section
"Turning speakers on or off (SP-SEL)" is not
displayed.
1. Press and hold the [ADJ] button for 1 second
or longer to enter adjust mode.
2. Press the [a] or [d] button to change to
the [FILTER E] display.
3. Press the [ENT] button to display the
adjustment item.