KNOW YOUR PRESSURE
WASHER
Read the owner's
manual and safety rubes before operating
your pressure
washer,
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Recoil Starter
Air Cleaner
Throttle Control
Lever
Oil Fill Cap and Dipstick
Detergent Pick-Up
Tube and Filter
Primer Bulb
Fuel Cap
Air Filter -- Protects engine by filtering dust and
debris out of intake air.
Automatic
Cool Down System -- Cycles water
through pump when water reaches 125°z155°F. Warm
water wHmdischarge
from pump onto ground.
TMs
system prevents
interna! pump damage.
Detergent
Pick-Up
Tube and Filter = Used to siphon
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap = Fill fuel tank with regular unleaded fuel here.
High Pressure
Hose (not shown) - Connect one end
to the spray gun and other end to the high pressure
outlet.
High Pressure
Outlet -- Connection for high pressure
hose.
Nozzle Extension
with Quick Connect
(not shown)
-- Allows you to switch between four different nozzles.
Water inlet
High Pressure Outlet
Pump equipped with
Automatic Cool Down System
Oil Fitl Cap and Dipstick
- Check and fill engine with
oil here. See page 6 for oil recommendations
and
filling instructions.
Primer Bulb -- Prepares a cold engine for starting.
Pump -- Develops high water pressure.
Recoim Starter -- Used for starting the engine
manually.
Spray Gun (not shown} - Controls the application of
water onto cleaning surface with trigger device.
includes trigger lock.
Spray Tips (not shown} -- Chemical injection, 0%
15 °, and 40°: for various high pressure cleaning
applications.
Throttle
Control
Lever - Sets engine in starting
mode for recoil starter and stops running engine.
Water inlet -- Connection for garden hose.