Care; Plastic Parts - Vermeiren V200 Manual De Instrucciones

4.3

Care

4.3.1 Covers
The cleaning of the cover shall be according:
 Clean covers with a cloth moistened with hot water. Be aware that you don't
soak the cover.
 Use a mild commercial detergent for removing stubborn dirt.
 Stains can be removed by using a sponge or a soft brush.
 Do not use strong cleaning liquids like solvents, nor use hard brushes.
 Never clean with steam and/or pressure washers.

4.3.2 Plastic parts

Clean plastic parts of your wheelchair with commercial plastic cleaners. Only use a
soft brush or soft sponge.
Examples of plastic parts are the armrests, footrests, handles, tyres and ... .
4.3.3 Coating
The high quality of the surface layer guarantees optimal protection against corrosion.
If the outer coat is damaged by scratching or in some other way, get your specialist
dealer to repair the affected surface.
When cleaning, only use warm water and normal household detergents and soft
brushes and cloths. Ensure that no wetness gets into the tubes.
Initially the zinc parts only require rubbing with a dry cloth. Stubborn dirt can best be
removed by using a suitable commercial zinc polish.
Page 23
E
V200
May 2010